Got the reservior kits today and began bolting the brake M/C and res kit in place. I also attached my brake lines to the M/C end to make sure they were long enough. Here was were i had a bit of a problem. With 3 washers in place (one each end and 1 in between the 2 lines) the banjo bolt bottomed out before it tightened the lines up. I have placed 3 washers under the 2 lines as this seems to alow the banjo connectors to sit in the right place and also tighten up, has anyone else come accross this? I used the Brembo bolt which came with the res and Venhill lines.
Here are a couple of pics of the M/C and res kit fitted.
Here are a couple of pics of the M/C and res kit fitted.
Last edited: