I have just ordered the jaws cct , the haynes book says to use a new gasket and sealing washer when putting the new one in- does anyone know if the jaws item comes with these?
Cheers
Should have said..
Best advice is take the page out of the book....... If you set fire to it to warm your hands it will be more usefull
Take key out of ignition
Remove side fairing
Get a bungy, hook it round the top hose and get it lifted up a bit and held out the way
Undo top dust cover bolt and save it ( and washer IF one is fitted )
Undo two fixing bolts
Tap the CCT and it falls off
Clean off old gasket
Smear a little standard LM grease both sides of the gasket
Put gasket on CCT
Put CCT in place and fit new bolts and washers
ONLY THEN PULL THE PIN OUT OF THE TOP OF THE NEW CCT
Refit dust cover bolt
Refit fairing
Done
The rest you read in the book is all bollax and can be ignored