Wd40 is not the right tool for the job......penetrating oil....Ok bad fxxxin start to even examine closer
LH lower fairing bolt seized and starting to round off on allen key
Have soaked in wd40 and given some sharp taps
Still wont move
Will leave to soak
Rhs fairing came off a treat to do cct
After soaking the oil line bolts, I nipped mine up first by just a mm or so, no more. They then came out easily, I think they’re only in to about 12nM.Ok bad fxxxin start to even examine closer
LH lower fairing bolt seized and starting to round off on allen key
Have soaked in wd40 and given some sharp taps
Still wont move
Will leave to soak
Rhs fairing came off a treat to do cct
Ok will use shock and unlock spray...Wd40 is not the right tool for the job......penetrating oil....
I am nowBTW, you are aware that water is as good as WD40 for use as a penetrating oil ...?
It does absolutely sweet fa unless the offending article is moving a bit, then it just does what any light oil will do ;-)
There ya go !All sorted with shiny new braided hoses
Bolts came out ok with a weeks soak in penetrant as did fairing bolt
Happy bunny tonight