silverfox.xx
quocunque jeceris stabit
Here's a few bits you might find useful..
Someone asked me some time ago for a pic of whats under the seat.
Being a Corbin seat you have more underseat storage.
Puck is usually in a sock, autocom gubbins, aux relay next to tilt sensor, 12v socket, tool roll, tyre weld, Jaws tourch, tyre pressure gauge,
first aid kit, fold up rucksack, EDZ wind blocker, Nurofen, Motrax oiler controller, Helmet/kit rope lock.
Storage for pin lock inserts, in the sock.. hold both mine and wife's pinlocks
(either tinted or clear depending on whats fitted to the helmets)
this prevents them from damage. Made from a 5ltr paint tub lid.
Dash extension, Aux on off switch, gear indicator, voltage monitor. Easily made from a section of black square rain pipe. I've had this fitted for 4 years of more with no problems. It clears the ignition switch. Held in place with 2 tiny self tappers.
Alloy bracket to mount preload adjuster, had to be made to clear Givi wingrack support bar.. Simple design that is slightly longer than the one supplied and allows a twist in it to give required clearance.
And for those that have not seen this before, headlight height adjuster. details here... http://www.bikersoracle.com/blackbird/forum/showthread.php?t=48059&highlight=headlight+adjuster
Someone asked me some time ago for a pic of whats under the seat.
Being a Corbin seat you have more underseat storage.
Puck is usually in a sock, autocom gubbins, aux relay next to tilt sensor, 12v socket, tool roll, tyre weld, Jaws tourch, tyre pressure gauge,
first aid kit, fold up rucksack, EDZ wind blocker, Nurofen, Motrax oiler controller, Helmet/kit rope lock.
Storage for pin lock inserts, in the sock.. hold both mine and wife's pinlocks
(either tinted or clear depending on whats fitted to the helmets)
this prevents them from damage. Made from a 5ltr paint tub lid.
Dash extension, Aux on off switch, gear indicator, voltage monitor. Easily made from a section of black square rain pipe. I've had this fitted for 4 years of more with no problems. It clears the ignition switch. Held in place with 2 tiny self tappers.
Alloy bracket to mount preload adjuster, had to be made to clear Givi wingrack support bar.. Simple design that is slightly longer than the one supplied and allows a twist in it to give required clearance.
And for those that have not seen this before, headlight height adjuster. details here... http://www.bikersoracle.com/blackbird/forum/showthread.php?t=48059&highlight=headlight+adjuster