Fitting straight bars.

[Stuwilk]

Just going to fit a straight bar conversion from JAWs to my bike, anyone got the fitting instruction's ? or tips ? It doesn't look too testing but just don't want to miss anything!cheers

 

[Judge Dredd]

http://www.bikersoracle.com/blackbird/forum/showthread.php?t=68470&highlight=Straight+bars
All you need.

 

[Toth]

Just going to fit a straight bar conversion from JAWs to my bike, anyone got the fitting instruction's ? or tips ? It doesn't look too testing but just don't want to miss anything!cheers

Quick search will turn up some very recent posts and instructions re this subject I have the conversion on my Bird and it's brilliant

 

[SXMAN]

JAWS bars

1. Move the throttle cable to the outside of the forks.
2. Try to get hold of a 90 degree drill to fit the switches, much easier to get right first time if you can.

Read the instructions twice before you start!

Take your time.

 

[EVSSV]

I never drilled my bars and they have been fine..done 40000 odd miles with them now...so much better. .but then I'm a fat bastard!!!

 

[ianrobbo1]

So did you not get any instructions when you bought the bars from Jaws then?? :dunno:

 

[ianrobbo1]

There's been a couple of second hand sets doing the rounds recently, and the sellers don't bother sending the instructions, I had a bod turn up at mine a few weeks ago, "would I fit his set of jaws bars"! they weren't, I don't know who or where he got them from but they were nothing like the quality of the originals, he was a bit pissed off when I showed him mine against his "knock offs"!! :-0) and as far as I know he's still struggling to get them to fit!!:-0)

 

[Flymo01]

Just wondering if anyone who has fitted them to their bird has notified the insurance company about the modification?

 

[ianrobbo1]

Just wondering if anyone who has fitted them to their bird has notified the insurance company about the modification?

Yes I have, no change to my policy thanks!! @tu*

 

[Flymo01]

Yes I have, no change to my policy thanks!! @tu*

Good to know. Thanks

 

[Lockey1100xx]

There's been a couple of second hand sets doing the rounds recently, and the sellers don't bother sending the instructions, I had a bod turn up at mine a few weeks ago, "would I fit his set of jaws bars"! they weren't, I don't know who or where he got them from but they were nothing like the quality of the originals, he was a bit pissed off when I showed him mine against his "knock offs"!! :-0) and as far as I know he's still struggling to get them to fit!!:-0)

I bought a second hand set of Taff , bloody brilliant and a piece of piss to fit as he sent the instructions , no need for longer cables , just a bit of careful re routing , happy days