Yes, the UJs can take about 30 deg and this is only 17 deg.Only asking as I genuinely have no idea - will the drive shaft be ok at that angle?
But if it doesn’t I’ll chop the axle and offset the Diff.
Yes, the UJs can take about 30 deg and this is only 17 deg.Only asking as I genuinely have no idea - will the drive shaft be ok at that angle?
Where does the passenger sit
I'm only fitting a very small passenger seat so only very slim birds (females) will fit
Just Anti-fat Bird! Which I think is OKThat's slimin'ism'ist.
Just Anti-fat Bird! Which I think is OK
So a little more movement on the Dangerous Trike.
Slim I think you will be happy to see I have thought about the points you raised ......... and fuckin ignored you
Not really. I could not find the axle breather so I drilled and tapped a hole, added a nipple and fitted a tube.
I also changed the suspension rake so the top and bottom fixings are equal distance from the stub-axle. I then drilled a fixing through the mounting to ensure it cannot move.
seat is fitted, with space for a slim bird with a bit of nasty (it’s my dream)View attachment 49899View attachment 49900View attachment 49901
Now I have to work on the exhaust...
I still don't like the look of the prop shaft angle.
The age old engineering maxim "if it doesn't look right......." springs to my non-engineering mind.
I bow to those with greater knowledge.
Like the colour though
The age old engineering maxim "if it doesn't look right......." springs to my non-engineering mind.
I bow to those with greater knowledge.
Make sure you put a lining or a bit of carpet in. He'll love that....So I made my own 4 to 1 exhaust collector out of copper! I then connected it to a Suzuki GSX1000 end can.
Sounds great, but I cannot braze the copper. However now I know it all fits and sounds good I have ordered a proper BSK Works 4 to 1 collector.
Should have the beast running sometime next week.
Obviously the running issues will then surface but overall that will be the end of the 'build' phase.*
Edit to add - I am thinking of making a 'tray' type affair for the back so I can carry kit. I will probably make it and then ask for comments - NOT YOU ANDY!
You hurt me manWill it be big enough to carry all the bits that fall off?
Fair enough.So I made my own 4 to 1 exhaust collector out of copper! I then connected it to a Suzuki GSX1000 end can.
Sounds great, but I cannot braze the copper. However now I know it all fits and sounds good I have ordered a proper BSK Works 4 to 1 collector.
Should have the beast running sometime next week.
Obviously the running issues will then surface but overall that will be the end of the 'build' phase.*
Edit to add - I am thinking of making a 'tray' type affair for the back so I can carry kit. I will probably make it and then ask for comments - NOT YOU ANDY!