-
Welcome to the new B.I.R.D. Forum. Please be sure to read the "New Member / New Registered ? Please Read" thread in the Coffee Shop. This contains some important information. To become a full member ( £5.90 a year ) simply click on your user name near the top on the right I hope you enjoy the new site ................ Jaws ( John )
Shock !! Jaws buys Suzuki !!
- Thread starter Jaws
- Start date
P
Phoenix
Guest
Id bolt a few of your crash protectors on the roof mate, you will need em given how easy those babys are to flip over 
Naaaa..... it has to go along b4 it can fall over..
Mind you, just been at it with the pick axe and removed 2 kilos of mud from the off side sill, and pocked my finger through the inner wheel arch !
There is already so much plating on the chassis that it weighs a ton, and by the time I am finished welding in the new inner arches, rear floor etc etc it will be so heavy that I will proly have to beef up the suspension !
Mind you, just been at it with the pick axe and removed 2 kilos of mud from the off side sill, and pocked my finger through the inner wheel arch !
There is already so much plating on the chassis that it weighs a ton, and by the time I am finished welding in the new inner arches, rear floor etc etc it will be so heavy that I will proly have to beef up the suspension !
RHINO
Answering to nobody
VITARA
Not a bad little off roader for the money those John...
They don't tip over quite as freely as the old square LJ80 model and theSJ410/413 series, BIG TROUBLE they were.
The Suzuki 4X4 first appeared in 1979 'V'reg and were pants!!
I'll give you that tenner later..
Not a bad little off roader for the money those John...
They don't tip over quite as freely as the old square LJ80 model and theSJ410/413 series, BIG TROUBLE they were.
The Suzuki 4X4 first appeared in 1979 'V'reg and were pants!!
I'll give you that tenner later..
Sorry to say I doubt it will see nuch off road action mate.. I just needed a van type thing that was not a van ( if you know what I mean )
Now I have to find a gas conversion kit for it ( cos the weasel engine I had lined up is too big to go in the hole ! )
Now I have to find a gas conversion kit for it ( cos the weasel engine I had lined up is too big to go in the hole ! )