Rob P's mods...

[R2B2]

... I sometimes get a bit carried away with things like this but here goes...




Datatagged
Veto Evo


Ohlins rear shock
Ohlins fork springs (fitting when rear shock set-up is right)
Akrapovic full Titanium cans, s/s link pipes
321 Ignition! Evo III brake de-link with Goodridge braided hoses
Candy red wheel hubs, spokes and rim centers
Polished outer rims
Polished forks, swing arm, hangers, heelplates, pegs & pedals
321 XX white clock faces with red needles & backlighting
321 Undertail with Titanium fasteners
321 Clear flush mount indicators
Clear Alternatives clear rear light with LED clusters
Titanium front axle pinch bolts
Titanium front & rear axle bolt/nut
Titanium front disc bolts
Stainless Steel front caliper mounting bolts
Titanium brake and clutch lever assy pinch bolts
Pyramid hugger
DID gold X chain
Renthal hard anodised gold alloy sprocket
Titanium sprocket nuts
Titanium rear disc bolts
Stainless Steel engine cover bolts
Titanium front & rear hanger bolts
A few other S/steel & Titanium bolts here and there!
Goodridge braided clutch hose
MRA graduated tint double bubble
Candy red fenda extenda
Vista cruise control - Jaws
Clear headlamp protector - Jaws
100 watt bulbs - Jaws
Stainless Steel bar ends - Jaws
Jaws frame plugs

And finally for now... a pair of 020's to keep it all on the black stuff..! Thanks to all who put me right on tyres.

Pics on the other thread.
..........................................................

Now done a few more bits and pieces...

Hugger changed to Pyramid.
Axle ends and spacers chromed.
Fairing panheads all chromed.
Clear Alternatives front indicator lenses, Silverfusion bulbs.
321 Bird specific 'shrooms.

 

[Bruce H]

Bet it looks and sounds gorgeous. I want to see LOTS of pics please! I fancy doing my redbirds wheels like yours (and frenchuk's). Did you have them done or can you say it was simply a paint job after a 321 strip/polish?

 

[R2B2]

The wheels were..

.. Sprayed at Prestige Mototrcycle Paintwork in Swindon, by Keith.

Seb at 321 polished them first, just the outer rim sections, and then we shipped 'em across town for the paint...

 

[Bruce H]

Lovely, what sort of cost roughly? Is the polished area lacquered or do you wear the candy a bit each time you polish the ally?

I hope you get the camera out next time the sun shines, if the bike is one piece that is.

Good luck.

 

[R2B2]

Cost ...

... for the two wheels was ?150 + the dreaded. That's the hubs centers, spokes and the center section of the rim, up to the edge where the contour of the rim changes.

No Bruce, the ally's not laquered so I just have to take a bit of care. I'm using Belgom Alu for all the polished alloy. It's brilliant stuff (no pun intended) and non abrasive so it doesn't give the edge of the paint a bad time.

Belgom Alu, from France. M & P part No 503965 ?8.99 + postage.

Should finish to-nite... Pic's t'marra..! Weather permitting.


:-:

 

[Bruce H]

Well I think my red bird looks lovely and it's almost standard, yours would probably make me dribble!
I'm excited about the pics already, and I'm not drunk, or sad!!!

 

[R2B2]

Just ...

... tied the shovel on for tonite. (midnite + 30)

Everything torqued up... bodywork back on... number plate bolts needed in the morn and a good clean...

... I think I could be finished..