Big Bore Kit

[Wolfie]

after reading about petes big bore thought i would check the cost etc.

take a look here

http://www.tts-performance.com/catalog/product_info.php?cPath=100&products_id=64


or if you can't be bothered just read below.


CBR1100XX 1997-2001 1195cc Big Bore Kit
?440.00
H1195K



JE Pistons supply the highest quality forged pistons on the market. Most of our kits come complete with Pistons, Pins, Circlips and Rings. Standard bore piston kits do not come with piston rings. At TTS we can bore your cylinders, fit sleeves if required, bore and replate plated barrels. We also provide ride in, ride out services. Just bring your bike to us, we will remove the engine, do the work required, refit the engine and setup on the Dyno. Call us on 01327 858212 for a competitive quote.
Honda CBR1100xx Big Bore Kit
81mm Bore 11.5:1 Compression Ratio
1195cc 2mm Oversize
Cases Require Bore and Hone

 

[Wolfie]

or here

http://www.holeshotracing.co.uk/tuning/honda_blackbird.asp





Ride in / Ride Out Perfomance Modifications including all Dyno Time

Stage 1 - Dynojetting ( power gain 5% )
Typical 4 Cylinder jet kit
?90.00
K & N Filter
?40.00
Typical labour price to install and set up on our Dyno
?90.00
Total ?220.00

Stage 2 - Gas Flowed Head, Cams etc. ( power gain 20% )
Gas Flowed Head including 3 angle cut seats etc.
?300.00
Exchange High Lift Cams
?160.00
Slotted Cam Sprockets
?45.00
Gaskets
?80.00
Heavy Duty Clutch Springs
?15.00
Engine work labour to strip & rebuild, dial in cams, set valve clearances, fit clutch, etc.
?500.00
Total ?1,100.00

Stage 3 - 1195cc Big Bore Kit, Gas Flowed Head, Cams etc. ( power gain 30% )
Big Bore Piston Kit
?380.00
Cylinder Block Boring & Honing
?120.00
Gas Flowed Head including 3 angle cut seats etc.
?300.00
Exchange Kent Cams
?160.00
Gaskets
?90.00
Heavy Duty Clutch Springs
?15.00
Engine work labour to strip & rebuild, dial in cams, set valve clearances, fit clutch, etc.
?700.00
Total ?1,765.00


or turbo it


Motorcycle Honda Blackbird Turbo Parts

Ride in / Ride Out Perfomance Modifications including all Dyno Time
Intercooler
?470.00
Aluminium Pressurised Airbox
?280.00
Fuel Pump and Fuel Regulator
?120.00
Air Hoses
?50.00
Oil Hoses
?50.00
Vacuum and Fuel Hoses
?20.00
Boost Gauge with Bracket
?60.00
Akrapovic Big Bore Silencer inc Carbon Loop Bracket
?300.00
Headers
?400.00
Modified Mitsubishi turbo with adj' wastegate & blow off valve & short exhaust
?700.00
Stainless steel link exhaust (turbo to silencer)
?120.00
Cylinder Barrel Spacer Gasket
?40.00
Additional Gaskets
?60.00
Adjustable Cam Sprocket
?40.00
Air Filter
?50.00
Clutch upgrade kit ?20.00
Brackets and Fasteners etc
?20.00
Total ?2,800.00
Labour (Ride in/Ride out inc' Dyno Time, etc)
?700.00

 

[fat bert]

Sorry Foxy~~

Big Bore Kit

Thought this was you describing yourself!!!

 

[D.S.]

big bore kit, nah!

just get suicidal round, now that is a bore :}

 

[Wolfie]

told you before bert i don't do arses.





Joe, thats why i was pissed that time.

 

[D.S.]

I knew there'd be a reason!

bert, now that poor old Cyclops is gonna be out of action for a while have you a Gimp back-up? (oops wrong choice of words:} )

:dunno:

 

[1200Pete]

What they dont tell you is

Workshop time ?650

JE Piston Kit ?440

Re Bore/Hone & Champher 4 cylinder barrel to big bore ?120

Gasflow 4 cylinder head and 16 valves ?330

Cometic head gasket ?45

16 vave stem oil seals ?4.20

bearing :dunno: ?11.20

Heavy duty clutch spring set ?10.00

TTS Reprofiled cams with ACS ?245

Valve shims ?3.50

ETC, ETC.

What you end up with is ?2240.92

And worth every bloody penny whaaahhhooooooo :f

 

[D.S.]

Ferkin to cheaper to buy a whole bike hey Pete?

:dunno: :}

 

[richard]

Why not get some good ole Nos


LOL

http://www.nitrous-solutions.com/

R

:neenaw: :neenaw: :neenaw:

Back tyre lasts 1500k kin hell

 

[1200Pete]

Originally posted by richard
Why not get some good ole Nos


LOL

http://www.nitrous-solutions.com/

R

:neenaw: :neenaw: :neenaw:

Back tyre lasts 1500k kin hell

Hmmm, funny you should say that.

Dear santa........

 

[bUSA Man]

Re: Sorry Foxy~~

Originally posted by fat bert
Thought this was you describing yourself!!!

Just ditch that crow, buy a FALCON and save yourself some [dosh]? (hope that's right, still practicing me "English")